OverviewÂ
1. This equipment is suitable for hospitals, medical waste, living rubbish, dead animals, and urban and rural garbage disposal in various non-hazardous waste treatment scenarios.
2. Â Simple and convenient operation, high burning temperature, and an organic matter removal rate of up to 99%. It burns quickly, effectively, covers a small area, has low cost, and is easy to maintain with few malfunctions.
Specifications
1. Competitive price/reliable qualityÂ
2. Suitable for Medical Waste, Dead Animals, etc.
3.  High working efficiency  
Features
1. A combustion chamber temperature of 650 ~ 850 ºC, fuel completely ashing, reduced capacity more than 97% or higher; The furnace heating up fast, fuel consumption, burning full.
2. 100% low excess air coefficient, using vortex combustion process.
3. Low temperature control system design, operation cost is low, the use of cold heat exchanger cooling process can realize resource recycling.
4. Cover an area of small, simple operation, convenient maintenance.
Scope
Medical waste, dead animals, marine garbage incineration or general enterprises of garbage, street leaves, town hospital, living garbage, laboratory waste, etc.
Advantages
1. Long lifetime
2. Totally enclosed operation
3. Suitable for treating infectious waste
4. Avoid secondary pollution
5. Simple operation
Technological process(Take the case of animal whole-body burning)
1. Â Diseases of livestock and poultry body as a whole into the incinerator, start switch program by combustion engine combustion spontaneous combustion, the general temperature control in 650-850 degrees Celsius can the body to complete carbide spontaneous combustion.
2. A portion of the fuel particles in the process of combustion conditions restrictions non-flammable, so the device is equipped with a size exhaust gas purifier in the combustion state combustion until completely carbide.
3. Â Carbide after burning need to select site (away from the water and residential area) were buried, completely put an end to the spread of germs.
4. The operation of the incinerator control adopts automatic program control, reduce the labor intensity of workers, incinerator furnace door, the design of the slag discharge door adopt full sealed structure, burning furnace and totally isolated from outside the furnace, forming negative pressure combustion, put an end to the possibility of secondary pollution, especially for dangerous infectious medical waste treatment, more can reveal its unique advantage.
The main technical parameters
| Model | ZTFS-25 | ZTFS-20-25 | ZTFS-20-60 | ZTFS-20-120 | ZTFS-150-400 |
| Burning | dogs, cats | rat, rabbit, monkey, dog | chicken, duck, goose, birds | pig | pigs, horses, cattle |
| Processing (kg/batch) |
25 | 20-25 | 20-60 | 20-120 | 150-400 |
| Volume (m³) |
2.5 | 2.5 | 3.0 | 8.0 | 16.0 |
| Power consumption (kw/h) |
2 | 2-4 | 2-5 | 3-12 | 15-50 |
| Fuel consumption (L/h) |
3 | 3-10 | 3-12 | 4-15 | 20-60 |
| Equipment size (mm) |
2500×1500 ×1400 |
2300×1200 ×2100 |
2200×1300 ×2300 |
2500×2300 ×3000 |
3000×4000 ×2800 |
| Weight(t) | 1 | 3-8 | 4-8 | 4-12 | 15-45 |
Incineration system
1.Furnace body is made up of refractory materials, insulation materials, insulation materials,   laying on the top of the cavity of grate outsourcing steel plate to prevent gas leakage and    the furnace body surface temperature is less than 50 ºC.In the furnace body is equipped with the access door side, auxiliary ignition burner on the side, too.The furnace body is equipped with work station.
2.Flue gas in the chamber of a stove or furnace from the bottom to wash the material, the moisture in the material drying, make material on fire in time. And arch before and after the refractory material accumulation of heat and radiation, so as to ensure the material combustion temperature.Prolong the residence time of flue gas, make the material and fly ash in the organic matter complete combustion, increase the destruction rate of harmful substances.
3.Furnace body in high temperature refractory lining, insulating material, is among the outer layer is a thermal insulation material, can reduce furnace body heat loss, improve the efficiency of burning;Appearance using steel plate as a protective layer to prevent air leakage;The refractory is developed by our company and building materials science research institute an acidic gas corrosion resistant, high temperature resistant, high strength refractory materials.
What We Have Â
1. China Leading Producing Technology
2. Super High Quality
3. Competitive Price
4. Big Production Ability
5. Fast Delivery
6. Excellent Sale and After-sale Service
FAQÂ
1. Â Are you a factory or trading company?
We are a company specializing in the production of various kinds of shredding machine, crusher, excrement and urine processor for the equipment manufacturers.
2. Â Samples are available?
Yes, the sample for your test quality.
3. Â The product test before shipping?
Yes, all the equipment before delivery to commissioning, there is no problem of equipment to the factory.
4. After sale service?Â
For most of the machines, the quality is guaranteed for one year since the date of shipment except wearing parts, we supply the on-line service for all the machines, and also supply the spare parts all the time with cost price, for some complicated machine or plant, we can send our engineer overseas too.
5. How Nitriding Single Screw and Barrel 1. When using new plastic, the remaining material of the screw should be cleaned. 2. When the temperature of the molten plastic is normal but black spots or discoloration of the molten plastic are constantly found, the rubber screw should be checked. 3. During processing, try to make the material plasticize evenly, and do not allow metal foreign matter to be mixed into the material to reduce the torque of the screw. force. Nitriding Single Screw And Barrel,Single Screw Barrel For Sale,Nitride Screw Barrel,Screw And Barrel Bolt ZHOUSHAN JINTANG OULIN MACHINERY CO., LTD. , https://www.oulinscrewbarrel.com