High Pressure End Suction Multistage Pump with Stainless Steel Impeller

Model NO.: MH2200 2200W
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump, Pumps
Speed: 2850r/Min
Insulation Class: B/F Is Available
Protection Class: IP44
Pump Body: Cast Iron
Front Cover: Cast Iron
Motor Casing: AISI 304 Stainless Steel
Shaft: 45# Carbon Steel / AISI 316/416 Stainless Steel
Trademark: WALPA or OEM
Transport Package: Carton
Specification: package dimension: 460 x 190 x 230mm
Origin: Fujian, China
HS Code: 84137099
Model NO.: MH2200 2200W
Position of Pump Shaft: Horizontal Pump
Pump Casing Combined: Horizontal Split Pumps
Mounting Height: Suction Centrifugal
Impeller: Closed
Usage: Pump, Pumps
Speed: 2850r/Min
Insulation Class: B/F Is Available
Protection Class: IP44
Pump Body: Cast Iron
Front Cover: Cast Iron
Motor Casing: AISI 304 Stainless Steel
Shaft: 45# Carbon Steel / AISI 316/416 Stainless Steel
Trademark: WALPA or OEM
Transport Package: Carton
Specification: package dimension: 460 x 190 x 230mm
Origin: Fujian, China
HS Code: 84137099
MH SERIES HORIZONTAL MULTISTAGE  PUMP


Applications & Installation

This Series centrifugal horizontal multistage water pumps able to develop high pressure and a high water lift with a comparatively low power consumption. They are suitable in domestic fittings by tank pressure groups, for small sprinkler irrigations and car washing because of their silent running and very good features,


High Pressure End Suction Multistage Pump with Stainless Steel Impeller

.
Performance
 
TYPE  Output Power Current Capacitor H.max Q.max Size S.Head N.W Package Dimention
Kw HP (A) (uF) (m) (L/min) (inch) (m) (kg) L×W×H(mm)
MH1300 5M 0.75 1.2 6 25 52 90 1"*1" 8 14.5 460×190×230

Working Limits
★ Max fluid temperature up to 80°C
★ Max ambient temperature up to 40°C


Motor
★Two-pole induction motor 
★ The speed is 2850 r/min
★ Insulation Class: B/F is available on request
★ Protection Class: IP 44
★ Continuous duty
★ Cooling: External ventilation
★ Total suction lift up to 8 mt.


Materials
★ Pump Body: Cast iron
★ Front Cover: Cast iron
★ Motor Casing: AISI 304 stainless steel
★ Impeller: Noryl / AISI 304 Stainless steel.
★ Diffuser: Noryl(PPO)
★ O-ring:NBR/EPDM
★ Shaft :45# carbon steel/ AISI 316 Stainless steel / AISI 416 stainless steel
★ Mechanical Seal: Ceramic/Graphite/ Silicon carbide

Notes
Pumps should be installed in a dry and covered area, protected against the weather.


High Pressure End Suction Multistage Pump with Stainless Steel Impeller
High Pressure End Suction Multistage Pump with Stainless Steel Impeller



FAQ

1.Products

   a)Q:What products do you mainly produce?
       A:We mainly produce many kinds of small electric water pumps,such as:peripheral pumps,self-suction pumps,centrifugal pumps,deep well pumps,JET self-priming pumps,multistage pumps,booster pumps,automatic pump station and electric motors ,generators etc.

   b)Q:What do you use to pack the goods?
       A:In general,the goods will be packed with strong color or brown carton boxes with foam.
          (Also can be according to customers' requirements)
          
   c)Q: What is your MOQ of the products?
       A: 10-50PCS
   d)Q: What is the delivery time?
       A: 25-40 days after receiving your deposit or L/C.
  e)Q: Is it all right to make customer's own brand name?
       A: That's all right to make your own brand name. And please send us a authorization.
  f)Q: Where is your Loading Port?
       A: FuzhouPort,China
   g)Q: What are your payment terms?
       A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight.
   h)Q: What is your company's available production capacity?
       A: 35000 pieces per month.

2.Quality

    a)Q:How about your products' quality?
        A:99% qualified.
    b)Q:How can you prove your goods is good quality?
        A:We have a very strictly quality control systems,from the selection of materials to finished products,all should be checked by 3 times to make sure everything is right.
    c)Q:how many QC procedures do you have?
        A:At least 15 checking procedures,for example:inspection of the production plan, purchase plan,technical drawings,selection of raw materials;checking the quality ,appearance ,size,dimension of all raw materials before they come in our warehouse;our technicians will go to instruct our workers to assemble goods with proper way and go along with inspectors to check quality of goods when begin to produce goods;then we wil have a series tests to all goods to make sure our goods work perfectly.

High Pressure End Suction Multistage Pump with Stainless Steel Impeller
High Pressure End Suction Multistage Pump with Stainless Steel Impeller


  MH SERIES HORIZONTAL MULTISTAGE  PUMP


Applications & Installation

This Series centrifugal horizontal multistage water pumps able to develop high pressure and a high water lift with a comparatively low power consumption. They are suitable in domestic fittings by tank pressure groups, for small sprinkler irrigations and car washing because of their silent running and very good features,


High Pressure End Suction Multistage Pump with Stainless Steel Impeller

.
Performance
 
TYPE  Output Power Current Capacitor H.max Q.max Size S.Head N.W Package Dimention
Kw HP (A) (uF) (m) (L/min) (inch) (m) (kg) L×W×H(mm)
MH1300 5M 0.75 1.2 6 25 52 90 1"*1" 8 14.5 460×190×230

Working Limits
★ Max fluid temperature up to 80°C
★ Max ambient temperature up to 40°C


Motor
★Two-pole induction motor 
★ The speed is 2850 r/min
★ Insulation Class: B/F is available on request
★ Protection Class: IP 44
★ Continuous duty
★ Cooling: External ventilation
★ Total suction lift up to 8 mt.


Materials
★ Pump Body: Cast iron
★ Front Cover: Cast iron
★ Motor Casing: AISI 304 stainless steel
★ Impeller: Noryl / AISI 304 Stainless steel.
★ Diffuser: Noryl(PPO)
★ O-ring:NBR/EPDM
★ Shaft :45# carbon steel/ AISI 316 Stainless steel / AISI 416 stainless steel
★ Mechanical Seal: Ceramic/Graphite/ Silicon carbide

Notes
Pumps should be installed in a dry and covered area, protected against the weather.


High Pressure End Suction Multistage Pump with Stainless Steel Impeller
High Pressure End Suction Multistage Pump with Stainless Steel Impeller



FAQ

1.Products

   a)Q:What products do you mainly produce?
       A:We mainly produce many kinds of small electric water pumps,such as:peripheral pumps,self-suction pumps,centrifugal pumps,deep well pumps,JET self-priming pumps,multistage pumps,booster pumps,automatic pump station and electric motors ,generators etc.

   b)Q:What do you use to pack the goods?
       A:In general,the goods will be packed with strong color or brown carton boxes with foam.
          (Also can be according to customers' requirements)
          
   c)Q: What is your MOQ of the products?
       A: 10-50PCS
   d)Q: What is the delivery time?
       A: 25-40 days after receiving your deposit or L/C.
  e)Q: Is it all right to make customer's own brand name?
       A: That's all right to make your own brand name. And please send us a authorization.
  f)Q: Where is your Loading Port?
       A: FuzhouPort,China
   g)Q: What are your payment terms?
       A: 30% deposit and balance T/T against copy of Bill of Lading or L/C at sight.
   h)Q: What is your company's available production capacity?
       A: 35000 pieces per month.

2.Quality

    a)Q:How about your products' quality?
        A:99% qualified.
    b)Q:How can you prove your goods is good quality?
        A:We have a very strictly quality control systems,from the selection of materials to finished products,all should be checked by 3 times to make sure everything is right.
    c)Q:how many QC procedures do you have?
        A:At least 15 checking procedures,for example:inspection of the production plan, purchase plan,technical drawings,selection of raw materials;checking the quality ,appearance ,size,dimension of all raw materials before they come in our warehouse;our technicians will go to instruct our workers to assemble goods with proper way and go along with inspectors to check quality of goods when begin to produce goods;then we wil have a series tests to all goods to make sure our goods work perfectly.

High Pressure End Suction Multistage Pump with Stainless Steel Impeller
High Pressure End Suction Multistage Pump with Stainless Steel Impeller


 

Vortex Pump

A vortex pump (also called a vortex pump) is a vane pump. It is mainly composed of impeller, pump body and pump cover. It is suitable for occasions requiring small flow (1 to 40 cubic meters per hour) and high lift (up to 250 meters).

A vortex pump is a vane pump. It is mainly composed of impeller, pump body and pump cover. The impeller is a disc with blades radially and evenly arranged around the circumference. An annular flow channel is formed between the pump body and the impeller, and both the suction port and the discharge port are at the outer circumference of the impeller. There is a partition between the suction port and the discharge port, thereby separating the suction port and the discharge port.

Vortex Pump,Vortex Water Pump,Vortex Centrifugal Pump,Vortex Circulation Pump

Jiangsu Qiantu Trading Co., Ltd. , https://www.jsqiantupump.com