In order to meet the needs of social and economic development and army building, the officers and men have been improved in their ability to extinguish fire and rescue and effectively protect the safety of people's lives and property. On March 17, 2015, Fushan Fire Brigade welcomed a high-emission fire engine with a value of more than RMB 2 million.
China National Heavy Duty Truck chassis fire truck
The newly-purchased high-emission fire engine adopts a heavy- duty chassis from China National Heavy Duty Truck . Its design is novel, its performance is stable, its load is 10 tons, and its fighting height reaches 25 meters. In order to ensure that the high-emission fire trucks are put into operational readiness as soon as possible, the brigade leaders actively invited manufacturers’ technicians to teach the drivers of the squadron’s on-duty vehicles to pay attention to vehicle driving and use techniques, and to organize the officers and men to systematically conduct the performance, maintenance, repair, and use of the vehicle’s equipment. Training and business coaching.
The installation of high-ejection fire trucks not only improved the efficiency of fire-fighting and rescue in Fushan District, but also greatly eased the contradiction between high-level fire-fighting and rescue missions and existing equipment shortages, improved the overall fire-fighting and rescue capabilities of the troops, and provided good economic development for Fushan District. Rapid development plays an important role!
A Solenoid Valve is an electromechanically operated valve. The valve is controlled by an electric current through a solenoid: in the case of a two-port valve the flow is switched on or off; in the case of a three-port valve, the outflow is switched between the two outlet ports. Multiple solenoid valves can be placed together on a manifold.
Solenoid valves are the most frequently used control elements in fluidics. Their tasks are to shut off, release, dose, distribute or mix fluids. They are found in many application areas. Solenoids offer fast and safe switching, high reliability, long service life, good medium compatibility of the materials used, low control power and compact design.
Besides the plunger-type actuator which is used most frequently, pivoted-armature actuators and rocker actuators are also used.
Solenoid valve designs have many variations and challenges.
Common components of a solenoid valve:
-
Solenoid subassembly
- Retaining clip (a.k.a. coil clip)
-
Solenoid Valve Timer
- Solenoid Coil (with magnetic return path)
- Core tube (a.k.a. armature tube, plunger tube, solenoid valve tube, sleeve, guide assembly)
- Plugnut (a.k.a. fixed core)
- Shading coil (a.k.a. shading ring)
- Core spring (a.k.a. counter spring)
- Core (a.k.a. plunger, armature)
- Core tube–bonnet seal
- Bonnet (a.k.a. cover)
- Bonnet–diaphram–body seal
- Hanger spring
- Backup washer
-
Diaphram
- Bleed hole
- Disk
-
Valve body
- Seat
- air valve
- water inlet valve
-
control valve
The core or plunger is the magnetic component that moves when the solenoid is energized. The core is coaxial with the solenoid. The core's movement will make or break the seals that control the movement of the fluid. When the coil is not energized, springs will hold the core in its normal position.
The plugnut is also coaxial.
The core tube contains and guides the core. It also retains the plugnut and may seal the fluid. To optimize the movement of the core, the core tube needs to be nonmagnetic. If the core tube were magnetic, then it would offer a shunt path for the field lines. In some designs, the core tube is an enclosed metal shell produced by deep drawing. Such a design simplifies the sealing problems because the fluid cannot escape from the enclosure, but the design also increases the magnetic path resistance because the magnetic path must traverse the thickness of the core tube twice: once near the plugnut and once near the core. In some other designs, the core tube is not closed but rather an open tube that slips over one end of the plugnut. To retain the plugnut, the tube might be crimped to the plugnut. An O-ring seal between the tube and the plugnut will prevent the fluid from escaping.
The solenoid coil consists of many turns of copper wire that surround the core tube and induce the movement of the core. The coil is often encapsulated in epoxy. The coil also has an iron frame that provides a low magnetic path resistance.
Solenoid Valve
Electromagnetic Valve, Pneumatic Component, Pneumatic Solenoid Valve, Air Compressor Valve,Solenoid Valve Timer
NINGBO BRANDO HARDWARE CO.,LTD , http://www.brandopneumatic.com