3inches DC Submersible Solar Pump for Irrigation

Model NO.: Top-Solar Pump
Application: Submersible Pump, Clarified Water Pump
Industry: Fisheries Pump
Media: Sea Water Pump
Performance: Automatic Pump
Theory: Rotary Pump
Size: 2 Inches ~ 6 Inches
Max Head: 10 - 300m
Max Flow: 1 - 200 M³ / Hr
DC Power: 80watt - 30kw
Voltage: 12V - 120V
Controller: Best Quality MPPT Controller Automatic
Material: Stainless Steel 316, 304
Trademark: Rison
Transport Package: Wooden Carton for Exportation Standard
Specification: CE, RoHS
Origin: Zhejiang, China
HS Code: 8413709190
China DC Submersible Solar Pump for Irrigation
(3 ~ 6 Inches Submersible & Surface Solar Pump, solar water pump)
 
 

DC Submersible Solar Pump for Irrigation and Residential

Solar panels are used to convert sunlight into electrical energy, which is then passed to the solar pump controller. This energy is used to power the pump.

Solar Controller / Inverter is used to stabilize the power voltage and output the power to drive the electric motor of the pump. If backup batteries (optional) are available, the pump controller can charge them.

Battery is used to store additional energy that can be used at a later time when sunlight may not be sufficient to drive the pump.

Water Level Detector / Sensors is connected to the controller and helps protect the pump from running dry, as well as automatically turning it off when a water tank is full.


3 inches DC Submersible Solar Pump for Irrigation
3 inches DC Submersible Solar Pump for Irrigation


3 inches DC Submersible Solar Pump for Irrigation

SPECIFICATION
1. Max Head : 20 -- 320m;
2. Max Flow : 0.76 -- 200 m³/hr;
3. Power : 0.1hp -- 100hp;
4. Voltage : 12 V - 120V; 220V - 540V
5. Motor : DC motor & AC motor;
6. Material : SS304 & SS316 ;
7. Controller : MPPT type for automatic restarting;

APPLICATION
1. Irrigation of agriculture
2. Drinking water and living water
3. Garden irrigation
4. Fountains

FEATURES
1. Efficiency improved by 25% with permanent magnet, direct current, brushless, non-sensor motor.
2. Double plastic package for rotor and stator, motor insulation ≥300MΩ, enhanced motor safety.
3. High-tech products using MPPT and DSP chip technology.
4. 100% copper wire, cold-rolled silicon steel sheet.
5. Stainless steel 304 & 316 shaft, motor body, screw.

NEW DEVELOPED SOLAR PUMP
1. Restart: Fully automatic restart every morning or when the sun appears after clouds;
2. Efficiency: 15-20% higher than standard controllers;
3. Protection Against Wrong Connection: Prevents damage if customers reverse panel "+" and "-" terminals;
4. High Temperature Resistance: Operates well under 50°C for 24 hours continuously;



PRODUCTION


3 inches DC Submersible Solar Pump for Irrigation
 

3' Submersible Solar Water Pump( Screw Pump )
Model Voltage (V) Power (Kw) Max. Flow (M³/H) Max. Head (m) Outlet (Inch) Diameter* Length (mm)
3SPS0.72/20-D12/80 12--26 45-150 0.72 20 G0.75"  
3SPS0.76/28-D12/120 12--26 120 0.76 28 G0.75"  
3SPS0.86/38-D12/150 12--26 150 0.86 38 G0.75"  
3SPS1.0/30-D24/80 16-36 45-150 1 30 G0.75" 76*400
3SPS1.3/50-D24/140 16-36 80-200 1.3 50 G0.75"  
3SPS1.8/80-D24/210 16-36 100-270 1.8 80 G0.75"  
3SPS1.8/100-D36/270 24-48 140-350 1.8 100 G0.75"  
3SPS1.8/120-D36/500 24-48 320-800 1.8 120 G0.75"  
3SPS2.3/140-D48/750 36-72 480-950 2.3 140 G0.75" 76*460
3SPS2.3/160-D72/1000 48-96 600-1200 2.3 160 G0.75"  
3SPS2.3/180-D72/1300 72-144 800-1500 2.3 180 G0.75"  

4' Submersible Solar Water Pump( Centrifugal Pump )
 
Model Voltage(V) Power(W) Max. Flow (M³/H) Max. Head (m) Outlet (Inch) Diameter* Length(mm) Weight (Kg)
4SPSC5.0/28-D24/250 18-26 120-360 5 28 G1.25" 100*540 12
4SPSC5.5/38-D36/400 24-48 200-500 5.5 38 G1.25" 100*650 12.5
4SPSC5.5/58-D48/750 36-72 450-900 5.5 58 G1.25" 100*680 13.5
4SPSc6.0/72-D72/1000 48-96 600-1200 6 72 G1.25" 100*740 15.5
4SPSc6.5/98-D72/1300 72-144 800-1500 6.5 98 G1.25" 100*880 16.5
4SPSC10/30-D48/750 36-72 450-900 10 30 G1.5" 100*540 13.5
4SPSC10/44-D72/1000 48-96 600-1200 10 44 G1.5" 100*650 15
4SPSC10/57-D72/1300 72-144 800-1500 10 57 G1.5" 100*680 15.5
4SPSC15/21-D72/1000 48-96 600-1200 15 21 G2" 100*540 13.5
4SPSC15/28-D72/1300 72-144 800-1500 15 28 G2" 100*620 14

6' Submersible Solar Pump( Centrifugal Pump )
 
Model Impeller Material Voltage (V) Power (KW) Max. Flow (M³/H) Max. Head (m) Outlet (Inch) Diameter* Length (mm)
6SPSC23/21-D72/1300 Stainless Steel 304 72-144 800-1500 23 21 G3" 125*700
6SPSC28/13-D72/1300 72-144 800-1500 28 13 G3" 125*710
6SPSC46/7-D72/1300 72-144 800-1500 46 7 G4" 125*690

 

Custom Aluminum Extrusion

Custom aluminum extrusion refers to the process of creating aluminum products with unique shapes and dimensions. This process involves heating a billet of aluminum to a specific temperature and then forcing it through a die to create a specific shape. The resulting product can be cut to the desired length and finished with various coatings or treatments.Custom aluminum extrusion is a popular choice for a wide range of industries, including construction, automotive, aerospace, and electronics. This process allows for the creation of complex shapes and designs that cannot be achieved with traditional manufacturing methods. Additionally, aluminum extrusions are lightweight, durable, and corrosion-resistant, making them ideal for a variety of applications.To create custom aluminum extrusions, manufacturers work closely with their clients to understand their specific needs and requirements. This includes determining the desired shape, size, and finish of the product. Once the design is finalized, the manufacturer will create a die that is used to extrude the aluminum into the desired shape.Overall, custom aluminum extrusion is a versatile and cost-effective method for creating unique and high-quality aluminum products. It allows for the creation of complex shapes and designs while maintaining the strength and durability of aluminum.

Custom Aluminum Extrusion,Custom Aluminium Extrusion,Bespoke Aluminium Extrusion,Custom Aluminium Profiles

Suzhou Remgar Metal Manufacturer Co.,Ltd. , https://www.remgaral.com