DC Submersible Solar Pump for Irrigation and Residential
Solar panels are used to convert sunlight into electrical energy which will be passed to the solar pump controller. The energy is then used to power the pump.
Solar Controller/Inverter is used to stabilize the power voltage and output the power to drive the electric motor of the pump. If backup batteries (optional) are available, the pump controller can charge them.
Battery is used for storing additional energy that can be used at a later time when sunlight may not be sufficient to drive the pump.
Water Level Detector/Sensors is connected to the controller and helps protect the pump from running dry, as well as automatically turning it off when a water tank is full.
SPECIFICATION
1. Max Head : 20 -- 320m;
2. Max Flow : 0.76 -- 200 m³/hr;
3. Power : 0.1hp -- 100hp;
4. Voltage : 12 V -120V; 220V -540V
5. Motor : DC motor & AC motor;
6. Material : SS304 & SS316 ;
7. Controller : MPPT type for Automatic Restart;
APPLICATION
1. Irrigation of agriculture
2. Drinking water and living water
3. Garden irrigation
4. Fountains
FEATURES
1. Efficiency improved by 25% using permanent magnet, direct current, brushless, sensorless motor.
2. Double plastic packaging for rotor and stator, motor insulation ≥300MΩ, enhanced security.
3. High-tech products with MPPT and DSP chip technology.
4. 100% copper wire, cold-rolled silicon steel sheet.
5. Stainless steel 304 & 316 shaft, motor body, screw.
NEW DEVELOPED SOLAR PUMP
1. Restart: Fully automatic restart every morning or when the sun appears after clouds;
2. Efficiency: 15-20% higher than standard controllers;
3. Protection Against Wrong Connection: Prevents damage if customers reverse panel "+" and "-" terminals;
4. High Temperature Resistance: Operates well under 50°C conditions for 24 hours continuously;
PRODUCTION
Â
| Model | Voltage (V) | Power (Kw) | Max. Flow (M³/H) | Max. Head (m) | Outlet (Inch) | Diameter* Length (mm) |
| 3SPS0.72/20-D12/80 | 12--26 | 45-150 | 0.72 | 20 | G0.75" | Â |
| 3SPS0.76/28-D12/120 | 12--26 | 120 | 0.76 | 28 | G0.75" | Â |
| 3SPS0.86/38-D12/150 | 12--26 | 150 | 0.86 | 38 | G0.75" | Â |
| 3SPS1.0/30-D24/80 | 16-36 | 45-150 | 1 | 30 | G0.75" | 76*400 |
| 3SPS1.3/50-D24/140 | 16-36 | 80-200 | 1.3 | 50 | G0.75" | Â |
| 3SPS1.8/80-D24/210 | 16-36 | 100-270 | 1.8 | 80 | G0.75" | Â |
| 3SPS1.8/100-D36/270 | 24-48 | 140-350 | 1.8 | 100 | G0.75" | Â |
| 3SPS1.8/120-D36/500 | 24-48 | 320-800 | 1.8 | 120 | G0.75" | Â |
| 3SPS2.3/140-D48/750 | 36-72 | 480-950 | 2.3 | 140 | G0.75" | 76*460 |
| 3SPS2.3/160-D72/1000 | 48-96 | 600-1200 | 2.3 | 160 | G0.75" | Â |
| 3SPS2.3/180-D72/1300 | 72-144 | 800-1500 | 2.3 | 180 | G0.75" | Â |
4' Submersible Solar Water Pump( Centrifugal Pump )
| Model | Voltage(V) | Power(W) | Max. Flow (M³/H) | Max. Head (m) | Outlet (Inch) | Diameter* Length(mm) | Weight (Kg) |
| 4SPSC5.0/28-D24/250 | 18-26 | 120-360 | 5 | 28 | G1.25" | 100*540 | 12 |
| 4SPSC5.5/38-D36/400 | 24-48 | 200-500 | 5.5 | 38 | G1.25" | 100*650 | 12.5 |
| 4SPSC5.5/58-D48/750 | 36-72 | 450-900 | 5.5 | 58 | G1.25" | 100*680 | 13.5 |
| 4SPSc6.0/72-D72/1000 | 48-96 | 600-1200 | 6 | 72 | G1.25" | 100*740 | 15.5 |
| 4SPSc6.5/98-D72/1300 | 72-144 | 800-1500 | 6.5 | 98 | G1.25" | 100*880 | 16.5 |
| 4SPSC10/30-D48/750 | 36-72 | 450-900 | 10 | 30 | G1.5" | 100*540 | 13.5 |
| 4SPSC10/44-D72/1000 | 48-96 | 600-1200 | 10 | 44 | G1.5" | 100*650 | 15 |
| 4SPSC10/57-D72/1300 | 72-144 | 800-1500 | 10 | 57 | G1.5" | 100*680 | 15.5 |
| 4SPSC15/21-D72/1000 | 48-96 | 600-1200 | 15 | 21 | G2" | 100*540 | 13.5 |
| 4SPSC15/28-D72/1300 | 72-144 | 800-1500 | 15 | 28 | G2" | 100*620 | 14 |
6' Submersible Solar Pump( Centrifugal Pump )
Â
| Model | Impeller Material | Voltage (V) | Power (KW) | Max. Flow (M³/H) | Max. Head (m) | Outlet (Inch) | Diameter* Length (mm) |
| 6SPSC23/21-D72/1300 | Stainless Steel 304 | 72-144 | 800-1500 | 23 | 21 | G3" | 125*700 |
| 6SPSC28/13-D72/1300 | 72-144 | 800-1500 | 28 | 13 | G3" | 125*710 | |
| 6SPSC46/7-D72/1300 | 72-144 | 800-1500 | 46 | 7 | G4" | 125*690 |
Â
Extrusion aluminum shell is a type of aluminum shell that is created by the process of extrusion. This process involves pushing aluminum through a die to create a specific shape or profile. The resulting aluminum shell is strong, durable, and lightweight, making it an ideal choice for a wide range of applications.Extrusion aluminum shells can be used in a variety of industries, including electronics, automotive, aerospace, and construction. They are often used as enclosures for electronic components, such as circuit boards and power supplies. They can also be used as structural components in buildings and vehicles.One of the benefits of extrusion aluminum shells is their versatility. They can be customized to meet specific design requirements, including size, shape, and finish. They can also be easily modified or adapted to accommodate changes in design or function.Another advantage of extrusion aluminum shells is their durability. They are resistant to corrosion and can withstand harsh environments, making them suitable for use in outdoor applications. They are also able to withstand high temperatures and can be used in applications where heat dissipation is important.Overall, extrusion aluminum shells offer a range of benefits that make them a popular choice for a variety of applications. Their strength, durability, and versatility make them an excellent choice for a wide range of industries and applications.
Extrusion Aluminum Shell,Extruded Enclosure,Aluminum Extrusion Case,Extrusion Enclosure
Suzhou Remgar Metal Manufacturer Co.,Ltd. , https://www.remgaral.com